BLADE CLEANER 500ml
£7.99
Description
BLADE CLEANER is a fast acting Hydro Carbon blade cleaner, will remove grease, grime and dirt fast and efficiently from all Clipper Blades.
Directions:-
(1) Dispense Blade Clean into a clearly labelled jar (or similar) with a large opening.
(2) With blade running on the clipper, immerse blade (not the clipper) into the cleaning fluid for at least 30 seconds.
(3) Remove the blade from the fluid and dry with an absorbent cloth and apply a small amount of clipper lubricating oil.
IMPORTANT NEVER TURN THE CLIPPER UPWARDS WITH THE WET BLADE UP TO ALLOW THIS OR ANY OTHER FLUID TO RUN INSIDE THE CLIPPER. Clean and oil blades regularly during use.
(4) At the end of the day, repeat as in (2 & 3), then remove blade from the clipper and slide the small blade to one side and put a small drop of oil on both contact surfaces of the large blade (the parts where the two blades touch). Slide the blade the other way and repeat on the other side. Wipe off excess oil and store in an absorbent material.
Available in 500ml Bottle Code PT541-500-ml
1 Litre Bottle Code PT541-1-L and 5L Pack Code PT541-5-L
Health and Safety Information:
Danger:
Repeated exposure may cause skin dryness or cracking. May be fatal if swallowed and enters airways.
IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting. Store locked up. Dispose of contents/container to an approved disposal site, in accordance with local regulations.
Safety Data Sheet:
Blade Cleaner Safety Data Sheet
